Olympus BondMaster 600 - Figure 3-2 Application Choices on the Quick-Setup Menu; Figure 3-3 the Powerlink Recognition Screen

DMTA-10045-01EN, Rev. E, August 2016
Chapter 3 52
• If a PowerLink probe is connected, the BondMaster 600 starts up in the PowerLink
recognition screen (see Figure 3-3 on page 52), which lets you automatically set
up the instrument for that type of probe.
Figure 3‑2 Application choices on the quick‑setup menu
Figure 3‑3 The PowerLink recognition screen