DMTA-10045-01EN, Rev. E, August 2016
Control Functions
111
To insert a character using the navigation keys
1. Rotate the knob until the forward ( ) or backward ( ) arrow is
highlighted.
2. Press the FULL NEXT key ( ) until the cursor is in the correct location.
3. Use the knob to select characters, and press the FULL NEXT key ( ) to accept
characters.
4. After all the desired characters have been selected, press to accept, or press
(return) to cancel.
To delete a character using the navigation keys
1. Rotate the knob until the forward ( ) or backward ( ) arrow is
highlighted.
2. Press the FULL NEXT key ( ) until the cursor is in the correct location (after the
character to be deleted).
3. Use the special deletion button ( ) to delete the character(s) by pressing
the FULL NEXT key ( ).
4. If required, use the knob and the FULL NEXT key ( ) to add new characters.
5. After completing the deletion(s) or addition(s), press to accept, or press
(return) to cancel.
To clear (delete) the entire field using the navigation keys
To delete the entire field (line) and reenter information at any time during text
editing, rotate the knob and select the clear button ( ), and then press the
FULL NEXT key ( ).
To Next Page
Loading...
