DMTA-10045-01EN, Rev. E, August 2016
Appendix A
210
Environmental
conditions
Operating temperature −10 °C to 50 °C (50 °F to 122 °F)
Storage temperature With batteries: 0°C to 50 °C (32 °F to 122 °F)
Without baeries: −20 °C to 70 °C (−4 °F to 158 °F)
IP rating Designed to meet requirements of IP66
Drop tested Method 516.6 Procedure IV, 26 drops, package for
shipment (Handheld & Portable products)
Shock tested Method 516.6 Procedure I,
a) Handheld & Portable products, 6 cycles each
axis, 15 g, 11 ms half-sine, or
b) In line / Rack Mount / Desk Top products, 40 G’s
on 3 faces × 1 time each face.
Vibration tested Method 514.6 Procedure I, Annex C, Figure
514.6C-5, general exposure: 1 hour each axis
Explosive environment Safe operation as defined by Class I, Division 2,
Group D, as found in the National Fire Protection
Association Code [NFPA 70], Article 500, and
tested using MIL-STD-810F, Method 511.5,
Procedure I.
Batteries Battery model 600-BAT-L-2 (Li-ion) [U8760058]
Battery type Single lithium-ion rechargeable battery or AA-size
alkaline batteries (in 8-cell holder)
Battery storage
temperature
0 °C to 50 °C (32 °F to 122 °F) at 80 % relative
humidity
Battery charge time 4 hours using the internal charger or an optional
battery charger
Battery life Between 8 hours and 9 hours
Battery size (width ×
height × length)
Approximately 58.9 mm × 22.3 mm × 214.6 mm
(2.4 in. × 0.9 in. × 8.5 in.)
External DC
supply
DC-IN voltage 24 VDC (60 W)
DC connector Circular, 2.5 mm pin diameter, center-positive
DC supply, external
(suggested model)
EP-MCA-X, where “X” denotes the power cord
type (see Table 18 on page 222)
Table 8 General and environmental specifications (continued)
Category Parameter Va lue
To Next Page
Loading...
