Panasonic FP7 Series Command Reference Manual

● The file name is "dt010.bin". The file number 10 specified by [D] is added.
[S] …DT110 [n] …5
[i]…US
DT108
DT109
DT110
1001110112 0113011401
DT111
DT112
DT113
DT114
DT115
DT116
DT117
DT118
[D] …10
File dt010.bin (16-bit binary format)
H 0108
H 0109
H 0110
H 0111
H 0112
H 0113
H 0114
H 0115
H 0116
H 0117
H 0118
■
Precautions for programming
● Also refer to section "19.9 Common Precautions for SD Memory Card Access Instructions".
● When the set file attribute is read only, any data cannot be written.
● The SD memory card access instruction active flag (SR3A) turns ON after the execution
condition has turned ON until the completion of the execution of the instruction. During this
time other SD memory card access instructions cannot be executed.
● Confirm that the SD memory card access instruction execution done flag (SR3B) is turned
OFF, and turn OFF the execution condition.
■
Flag operations
Name Description
SR3A (SD memory card access
instruction execution in progress)
Turns ON when instruction execution starts. Turns OFF when
instruction execution is complete.
SR3B (SD memory card access
instruction execution complete)
Turns OFF when instruction execution starts. Turns ON when
instruction execution is complete.
SR3C (SD memory card access
instruction execution result)
Indicates the execution results when instruction execution is
complete. Normal end = 0, abnormal end = 1
SR7, SR8 (ER)
To be set in case of out-of-range values in indirect access (index
modification).
To be set when an out-of-range value is specified for [n].
To be set when an out-of-range value is specified for [D].
18.1 CDTWT (Operation Memory File Write in BIN Format)
WUME-FP7CPUPGR-12 18-3

Panasonic FP7 Series Specifications

General

Brand	Panasonic
Model	FP7 Series
Category	Controller
Language	English