Panasonic FP7 Series Command Reference Manual

19.10 Ethernet Function: IP Addresses
■
IP address setting specifications
Address range Remarks
000.000.000.001 to 000.255.255.255
Although this range can be set, try not to use it wherever
possible.
001.000.000.000 to 126.255.255.255
128.000.000.000 to 223.255.255.255
■
List of conditional IP addresses
○: Available, ×: Not available, △: Self IP address is not available, default gateway is available
Address range
Setting using instructions
IPv4SET
(Self IP address
setting)
CONSET
(Destination address
setting)
FTPcSV
HTTPcSV
SMTPcSV
(Server address
setting)
000,000,000,000 △ × ×
127.000.000.000 to
127.255.255.255
× ○ ○
224.000.000.000 to
224.255.255.255
× ○ ○
: × ○ ○
239.000.000.001 to
239.255.255.255
× ○ ○
240.000.000.001 to
240.255.255.255
× ○ ○
: × ○ ○
247.000.000.001 to
247.255.255.255
× ○ ○
248.000.000.001 to
248.255.255.255
× ○ ○
: × ○ ○
255.000.000.001 to
255.255.255.254
× ○ ○
255,255,255,255 × ○ ×
(Note 1) When an IP address that cannot be set is specified with an instruction, an operation error will not
occur and the error flags of CY (SR9) and SD29 will be set.
■
Net mask setting
Masked bits should be left-justified for net mask setting. The following specifications are invalid.
Input notation Binary notation
255.255.253.0 11111111. 11111111. 11111101. 00000000
19.10 Ethernet Function: IP Addresses
19-24 WUME-FP7CPUPGR-12

Panasonic FP7 Series Specifications

General

Brand	Panasonic
Model	FP7 Series
Category	Controller
Language	English