17.11 FTPcSV (FTP Client Connected Server Setting)
■
Ladder diagram
(Note 1) The above figure shows the case that S1=U100 (built-in ET-LAN in the CPU unit) and S2=U1
(connection number 1) are specified by the UNITSEL instruction.
(Note 2) By copying and pasting the following text in the instruction list box of FPWIN GR7, the operand part of
the above program can be input.
FTPcSV "SV0,IPv4=192.168.1.1" "USER=user,PASS=pw" "TOUT=30"
■
List of operands
Operand Description
S1
Starting address of the device area that stores the string data that indicates the parameters for
specifying a server, or a character constant.
S2
Starting address of the device area that stores the string data that indicates the login setting
parameters, or a character constant.
S3
Starting address of the device area that stores the string data that indicates the detailed setting
parameters, or a character constant.
■
Devices that can be specified (indicated by ●)
Operan
d
16-Bit device:
32-Bit
device:
Integer
Real
numbe
r
St
rin
g
Index
modifie
r
W
X
W
Y
W
R
W
L
W
S
S
D
D
T
L
D
U
M
WI
W
O
TS
C
S
TE
C
E
IX K U H SF
D
F
" "
S1 ● ● ● ● ● ● ●
S2 ● ● ● ● ● ● ●
S3 ● ● ● ● ● ● ●
■
Outline of operation
● This instruction sets the server to which the FTP client is connected.
■
Processing
● The settings for the server to which the FTP client is connected are specified in the CPU unit
according to the specified parameters.
17.11 FTPcSV (FTP Client Connected Server Setting)
17-52 WUME-FP7CPUPGR-12