Panasonic FP7 Series Command Reference Manual

16 High-level instructions (Multi-
wire Link Communication)
16.1 SEND (When FP7 Multi-wire Link Unit Is Used)...............................16-2
16.2 RECV (When FP7 Multi-wire Link Unit Is Used)...............................16-6
16.3 PMGET (Acquiring MEWNET-W Parameters)..................................16-10
16.4 PMGET (Acquiring MEWNET-W2 Parameters)................................16-14
16.5 PMGET (Acquiring MEWNET-F Parameters)...................................16-18
16.6 PMSET / pPMSET (Change of MEWNET-W Parameters) ...............16-20
16.7 PMSET / pPMSET (Change of MEWNET-W2 Parameters) .............16-23
16.8 ERR (When FP7 Multi-wire Link Unit Is Used) .................................16-27
WUME-FP7CPUPGR-12 16-1

Panasonic FP7 Series Specifications

General

Brand	Panasonic
Model	FP7 Series
Category	Controller
Language	English