5 High-level Instructions (Data
Transfer)
Applicable Models: All Models
5.1 MV (Data Transfer) .............................................................................5-2
5.2 MV/ (Inversion and Transfer) ..............................................................5-4
5.3 MV2 (2 Data Transfer) ........................................................................5-6
5.4 MV3 (3 Data Transfer) ........................................................................5-8
5.5 BKMV (Block Transfer) .......................................................................5-10
5.6 COPY (Block Copy) ............................................................................5-13
5.7 BTM (Bit Block Transfer).....................................................................5-16
5.8 DGT (Digit Data Transfer)...................................................................5-18
5.9 RST (Reset)........................................................................................5-22
5.10 ZRST (Block Clear)...........................................................................5-24
5.11 BKEXT (16-bit Data Sign-extended Block Transfer) .........................5-26
5.12 BKMV16 (Block Transfer (32-bit Data to 16-bit Data))......................5-28
5.13 XCH (Data Exchange) ......................................................................5-30
5.14 SWAP (Exchange of High Bytes and Low Bytes) .............................5-32
5.15 BSWAP (High /Low Byte in n Block Exchange)................................5-34
5.16 LCWT (Specified PB Local Device Write).........................................5-36
5.17 LCRD (Specified PB Local Device Read).........................................5-38
5.18 PUSHIX (Index Register Backup).....................................................5-42
5.19 POPIX (Index Register Recovery) ....................................................5-44
WUME-FP7CPUPGR-12
5-1
To Next Page
Loading...
Need help?
General
