Panasonic FP7 Series - ED (End)

3.28 ED (End)
■
Ladder diagram
■
Outline of operation
● This instruction writes the ED instruction at the end of the regular program area.
Subroutine program
Normal program area
ED
● The program area is divided into the regular program area (main program) and the
"subroutine" and "interruption program" areas (subprograms) by this instruction.
● Be sure to write the subroutine and interruption program after the ED instruction.
3.28 ED (End)
WUME-FP7CPUPGR-12 3-91