■
[S3]: Specification of movement type
Operand Specified bits Description
S3
bit 0
0: Overwrites if there is a file with the same name in the copy destination.
1: Terminates with an error without overwriting if there is a file with the same
name in the copy destination.
Bit1 to 15 (Reserved for system)
■
Example of processing
Example) When moving a file "abc\data1" to "\def\test2"
(1) Character count (2) Path name (folder name + file name)
■
Precautions for programming
● Also refer to section "19.9 Common Precautions for SD Memory Card Access Instructions".
● The SD memory card access instruction active flag (SR3A) turns ON after the execution
condition has turned ON until the completion of the execution of the instruction. During this
time other SD memory card access instructions cannot be executed.
● When the folder specified by [S2] does not exist, "No file/folder" error occurs.
● When there is not enough free space, "memory card capacity shortage" error occurs.
● When a folder is specified for [S1] and a file for [S2], "file name error" occurs.
18.12 CMV (File Move)
18-54 WUME-FP7CPUPGR-12
To Next Page
Loading...
Need help?
General
