■
Precautions for programming
● To enable the interruption of the unit, the interruption to the CPU unit must be enabled using
the El instruction.
● When a unit in which interruption occurs is not installed in the specified slot, an operation
error occurs.
● When there is no definition of the interruption program (INTPG) corresponding to an enabled
bit, the bit is not enabled. Zero is written.
■
Flag operations
Name Description
SR7
SR8
(ER)
ON in the case of out-of-range in indirect access (index modification)
3.41 IMASK (Unit Interruption Disable/Enable Setting)
3-124 WUME-FP7CPUPGR-12
To Next Page
Loading...
Need help?
General
