Panasonic FP7 Series Command Reference Manual

Name Description
SR8
(ER)
To be set when the comparison range is outside the accessible range.
To be set when the control data is outside the range.
To be set when the block length is outside the available range.
SRB (=)
To be set when the comparison blocks of [S3] and [S4] match.
To be reset when the comparison blocks of [S3] and [S4] do not match.
4.3 BCMP (Block Comparison)
WUME-FP7CPUPGR-12 4-11

Panasonic FP7 Series Specifications

General

Brand	Panasonic
Model	FP7 Series
Category	Controller
Language	English