Panasonic FP7 Series - Page 299

■
Example of processing: Presetting of specified PB local devices
The following example shows how to initialize the local devices of PBs that are specified in one
PB.
● Executes the instruction in PB1, and sets to initialize devices to the local devices of PB2 to 4
collectively.
PB1
Sets initial values to be preset.
R0
DF
MV.US U0 DT0
MV.US U1 DT1
MV.US U2 DT2
MV.US U3 DT3
Presets local devices of specified PBs.
(Specified PBs are PB2 to 4.)
R1
DF
DT0 U4 U2LCWT.US _DT0
DT0 U4 U3LCWT.US _DT0
Local DT
Data amount:4 Local DT
Initial value 3
Initial value 2
Initial value 1
Initial value 0
DT0 U4 U4LCWT.US _DT0
Local DT
PB2
PB3
PB4
Data amount:4
Data amount:4
5.17 LCRD (Specified PB Local Device Read)
WUME-FP7CPUPGR-12 5-41