Panasonic FP7 Series Command Reference Manual

OPH0
├OpeHis0(180619_112345).csv
├OpeHis0(180619_113412).csv
└OpeHis0(180619_114630).csv
・・・
OPH7
├OpeHis7(180620_112345).csv
├・・・
└OpeHis7(180624_114630).csv
Output file directories are named for each group, as below.
\OPH
x\ x: Group number
Output files are named as below.
OpeHisx(YYMMDD_HHMMSS).csv x: Group number
YYMMDD: File creation date (year/month/day)
HHMMSS: File creation time (hour/minute/second)
● The OPHSAVE instruction cannot be executed while the SD memory card access instruction
is being executed.
■
Flag operations
Name Description
SD memory card access
instruction in progress (SR3A)
Turns ON when instruction execution starts. Turns OFF when instruction
execution is complete.
SD memory card access
instruction execution completed
(SR3B)
Turns OFF when instruction execution starts. Turns ON when instruction
execution is complete.
SD memory card access
instruction execution result
(SR3C)
Indicates the execution results when instruction execution is complete.
Normal end = 0, abnormal end = 1
SR7
SR8
(ER)
The flag is set when an out-of-range value is specified for S1.
The flag is set when an out-of-range value is specified for S2.
The flag is set when an out-of-range value is specified for S3.
The flag is set when an out-of-range value is specified for S4.
The flag is set when a group without registered operation histories is
specified.
To be set in case of out-of-range values in indirect access (index
modification).
13.7 OPHSAVE (Operation History Save to SD Card)
13-12 WUME-FP7CPUPGR-12

Panasonic FP7 Series Specifications

General

Brand	Panasonic
Model	FP7 Series
Category	Controller
Language	English