Panasonic FP7 Series Command Reference Manual

● The ASCII code that express a decimal figure equivalent to the number of bytes (i.e. number
of characters) specified by [S2], starting from the area specified by [S1], is converted into a
decimal figure and stored in the area specified by [D].
● If a negative sign (-) is contained in the ASCII code specified by [S1], specify SS or SL for
the operation unit. An operation error occurs if operation units US or UL are used.
14.8 ABIN (Conversion: Decimal ASCII → BIN)
WUME-FP7CPUPGR-12 14-27

Panasonic FP7 Series Specifications

General

Brand	Panasonic
Model	FP7 Series
Category	Controller
Language	English