● The operations for the maximum length of ASCII string and for the valid range of conversion
data values are the same as the ATOB instruction.
● To directly specify a character constant for the operand [S1], enter the constant in the
"Instruction list" dialog box in the FPWIN GR7 programming tool.
■
Flag operations
Name Description
SR7
SR8
(ER)
To be set in the case of out-of-range in indirect access (index modification).
To be set when the conversion format specified by [S1] is not an available operation unit.
To be set when the conversion format specified by [S1] is not a control character.
To be set when the number of ASCII code digits specified by [N] exceeds the maximum
number of digits for the control characters specified by [S1].
To be set when the storage start position specified by [N] is out of the range.
To be set when the conversion data amount specified by [N] exceeds the [S2] area.
To be set when the conversion data amount specified by [N] is out of the range.
14.10 ACHK (ASCII Data Check)
WUME-FP7CPUPGR-12 14-45
To Next Page
Loading...
Need help?
General
