Panasonic FP7 Series Command Reference Manual

■
Precautions for programming
● The character data of the [D] area from before performing the operation is overwritten.
● If the number of characters in [S2] is greater than the number of characters in the [S1]
character string, the number of characters of the [S1] character string is sent.
● The [n] position should be specified by a number counted from low order in sequence,
putting the least significant byte as K0 (Byte 0): 0, 1, 2 and so on.
■
Flag operations
Name Description
SR7
SR8
(ER)
To be set in the case of out-of-range in indirect access (index modification).
To be set when [S2] (number of characters) is out of the range.
To be set when the number of characters of [D] is smaller than [n].
14.24 MIDW (Rewrite from a Given Position in the String)
14-100 WUME-FP7CPUPGR-12

Panasonic FP7 Series Specifications

General

Brand	Panasonic
Model	FP7 Series
Category	Controller
Language	English