(Note 1) The data (*) out of the destination range, the high byte of DT7, does not change.
(1) Storage area size (2) Character count
Example 2) Setting 256 characters to DT0, repeating a set of the 16 characters from
A to P
[S1]...U256 [S2]... "ABCDEF…KLMNOP" [D]...DT0
(1) Storage area size (2) Character count
Example 3) Converting 0 characters of the string "" (repeated double quotation
marks)
[S1]...U1 [S2]... "" [D]...DT0
(Note 1) The data (*) that is out of the destination range, DT2 to DT7 , does not change.
(1) Storage area size (2) Character count
14.26 ESSET (Conversion: Character Constant → ASCII Code: With Storage
Area Size)
WUME-FP7CPUPGR-12 14-105
To Next Page
Loading...
