(Note 1) The data (*) that is out of the destination range, starting from the high byte of DT24 and ending with
DT26, does not change.
(a) Area in which the string to be taken out is stored (b) Area in which the string that is taken out is stored
(1) Storage area size (2) Character count
Example 2) When the number of characters specified for [S2] is larger than the
number of characters for the string that is stored in [S1]
The number of characters that is stored in [S1] is taken out and stored in [D].
[S1]...DT0 [S2]...U7 [S2]...DT20
(Note 1) The data (*) that is out of the destination range, starting from the high byte of DT23 and ending with
DT26, does not change.
Example 3) When the number of characters that were taken out exceeds the storage
area size for [D]
Only the amount of characters that can be stored in [D] is transferred, and the carry flag SR9
(CY) is set to ON.
[S1]...DT30 [S2]...U7 [S2]...DT50
14.33 ERIGHT (Takeout of the Right Side of a String: With Storage Area Size)
WUME-FP7CPUPGR-12 14-131
To Next Page
Loading...
Need help?
General
