Name Description
SR8
(ER)
The connection specified with UNITSEL is closed (other than "Connect").
The communication mode of the communication port specified with UNITSEL is not
"General-purpose communication."
When the data device specified by [S] exceeds the area
When the number of sent data specified by [n] is 0. The volume including a start code and
an end code exceeds the specified maximum value.
When the number of sent data specified by [n] exceeds the data area
Either 0 or a negative value is set for [N] in the settings of sending to ET-LAN.
Set when executed in an interrupt program.
15.2 GPTRNS / pGPSEND /GPSEND (General-Purpose Communication
Send Instruction)
15-14 WUME-FP7CPUPGR-12
To Next Page
Loading...
Need help?
General
