Panasonic FP7 Series Command Reference Manual

Setting example
・Mail text example
Example)
DT100 H0027 No. of bytes
2014/%d/%d
Temperature is %d degrees C.
S1="ID0" S2=DT100
DT101
DT102
DT103
DT104
DT105
DT106
H 54(T)
DT107
DT108
DT109
DT110
DT111
DT112
DT113
DT114
DT115
H 0D(CR)
H 65(e) H 70(p)
H 30(0) H 32(2)
H 34(4) H 31(1)
H 2F(/) H 64(d)
H 69(i) H 20(␣)
H 25(%) H 2F(/)
H 64(d) H 25(%)
H 6D(m) H 65(e)
H 61(a) H 72(r)
H 75(u) H 74(t)
H 65(e) H 72(r)
H 20(␣) H 73(s)
H 64(d) H 25(%)
H 64(d) H 20(␣)
H 67(g) H 65(e)
H 65(e) H 72(r)
H 73(s) H 65(e)
H 43(C) H 20(␣)
H 00 H 2E(.)
DT116
DT117
DT118
DT119
DT120
■
Flag operations
Name Description
SR7
SR8
(ER)
To be set in case of out-of-range values in indirect access (index modification).
To be set when the slot number [S1] specified with UNITSEL is not 100 (built-in ET-LAN).
To be set when an out-of-range value is specified for parameters.
Set when executed in an interrupt program.
To be set when the send request of the mail transmission control relay of a target ID number is 1:
Requesting.
To be set when the mail transmission setting for a target ID number is not set with the mail
transmission setting instruction or the tool software.
CY
(SR9)
Set when the instruction is the initialization of Ethernet. The detail code set in SD29 is "11:
Ethernet initialization active".
(Note 1) For details of the error codes stored in the system data SD29, refer to "20.2 List of System Data
Registers".
17.21 SMTPcBRD (Mail Text Read)
WUME-FP7CPUPGR-12 17-107

Panasonic FP7 Series Specifications

General

Brand	Panasonic
Model	FP7 Series
Category	Controller
Language	English