R&S SMA100B - Page 626

Remote control commands
R&S
®
SMA100B
626User Manual 1178.3834.02 ─ 09
Commands
[:SOURce<hw>]:VOR:SOURce....................................................................................... 626
[:SOURce<hw>]:VOR[:BANGle].......................................................................................626
[:SOURce<hw>]:VOR[:BANGle]:DIRection....................................................................... 627
[:SOURce<hw>]:VOR:COMid:CODE................................................................................627
[:SOURce<hw>]:VOR:COMid:DASH................................................................................628
[:SOURce<hw>]:VOR:COMid:DEPTh...............................................................................628
[:SOURce<hw>]:VOR:COMid:DOT.................................................................................. 628
[:SOURce<hw>]:VOR:COMid:FREQuency....................................................................... 628
[:SOURce<hw>]:VOR:COMid:LETTer...............................................................................629
[:SOURce<hw>]:VOR:COMid:PERiod.............................................................................. 629
[:SOURce<hw>]:VOR:COMid:SYMBol............................................................................. 629
[:SOURce<hw>]:VOR:COMid:TSCHema..........................................................................630
[:SOURce<hw>]:VOR:COMid[:STATe].............................................................................. 630
[:SOURce<hw>]:VOR:FREQuency.................................................................................. 630
[:SOURce<hw>]:VOR:FREQuency:MODE........................................................................631
[:SOURce<hw>]:VOR:ICAO:CHANnel..............................................................................631
[:SOURce<hw>]:VOR:MODE.......................................................................................... 632
[:SOURce<hw>]:VOR:REFerence[:DEViation]...................................................................633
[:SOURce<hw>]:VOR:SUBCarrier:DEPTh........................................................................ 633
[:SOURce<hw>]:VOR:SUBCarrier[:FREQuency]............................................................... 633
[:SOURce<hw>]:VOR:VAR:FREQuency........................................................................... 634
[:SOURce<hw>]:VOR:VAR[:DEPTh]................................................................................ 634
[:SOURce<hw>]:VOR:SOURce <VorSourceSel>
Sets the modulation source for the avionic standard modulation.
If external modulation source is set, the external signal is added to the internal signal.
Switching off the internal modulation source is not possible.
Parameters:
<VorSourceSel> INT | EXT | INT,EXT
INT
Internal modulation source is used.
EXT|INT,EXT
An external modulation source is used, additional to the internal
modulation source.
The external signal is input at the Ext connector.
*RST: INT
Example: See Example "Configure and generate a VOR signal"
on page 596.
Manual operation: See "EXT AM" on page 136
[:SOURce<hw>]:VOR[:BANGle] <BAngle>
Sets the bearing angle between the VAR signal and the reference signal.
SOURce subsystem