Ricoh D093 - Page 104

Main Machine Installation (D093/D094)
D093/D094 3-26 SM
4. Attach upper output stacker (R) [1].
5. Attach upper output stacker (L) [2].
6. Attach the guide lever [2].
This guide lever should be up or down, depending on whether "Upper" or "Lower" is
selected for "Copy Output" on the operation panel:
 The guide lever should be up for "Upper" output.
 The guide lever should be down for "Lower" output so the original can pass over it.
7. Attach the upper output guide hinges [4].
8. Attach the upper output guide [5].
9. Attach the original output guides [6]
, , , .
10. Attach the emblem [1] and panel [2] to the toner hopper cover [3].
 Push the panel in until the emblem and panel move into their positions with an
audible click.