EasyManua.ls Logo

Ricoh D093 - CC Call; Sc;Alarm Setting

Ricoh D093
779 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Main SP Modes
SM 6-53 D093/D094
System
Maintenance
Reference
5508 CC Call CTL
1 Jam Remains
Enables/disables initiating a call.
[0 to 1/1/1]
0: Disable
1: Enable
2 Continuous Jams
3 Continuous Door Open
11 Jam Detection: Time Length
Sets the length of time to determine the length of an unattended paper jam.
[3 to 30/10/1]
This setting is enabled only when SP5508-4 is enabled (set to 1).
12 Jam Detection Continuous Count
Sets the number of continuous paper jams required to initiate a call.
[2 to 10/5/1]
This setting is enabled only when SP5508-4 is enabled (set to 1).
13 Door Open: Time Length
Sets the length of time the remains opens to determine when to initiate a call.
[3 to 30/10/1]
This setting is enabled only when SP5508-4 is enabled (set to 1).
5515
SC/Alarm Setting CTL
Determines whether an SC call is issued when an SC error occurs while either
CSS (Japan) or @Remote is enabled:
[0 to 1/1/1]
1: An SC call is issued when an SC error occurs.
0: An SC call is not issued when an SC error occurs.
1 SC Call
Determines whether an SC call is issued when an SC error occurs while either
CSS or @Remote is enabled:
[0 to 1/1/1]
1: An SC call is issued when an SC error occurs.
0: An SC call is not issued when an SC error occurs.

Table of Contents

Related product manuals