Ricoh D093 - CERT: Issuer; CERT: Valid End; Line Type Automatic Judgment DFU; Selection Country DFU

Main SP Modes
SM 6-67 D093/D094
System
Maintenance
Reference
92
CERT: Issuer
Displays the common name of the issuer of the @Remote certification. CN =
the following 30 bytes. Asterisks (****) indicate that no DESS exists.
93
CERT: Valid Start
Displays the start time of the period for which the current @Remote
certification is enabled.
94
CERT: Valid End
Displays the end time of the period for which the current @Remote
certification is enabled.
150
Selection Country DFU
Used only for Embedded RC Gate-M to select a country name. Once the
number/country is selected, the following settings are checked:
 Access point telephone number
 Dial-up user name
 Modem parameters set for the country
[0 to 10/*/1]
*: 0: Japan, 1: USA, 3:UK
0:Japan, 1:USA, 2:Canada, 3:UK, 4:Germany, 5:France, 6:Italy,
7:Netherlands, 8:Belgium, 9:Luxembourg, 10:Spain
151
Line Type Automatic Judgment DFU
Used only for Embedded RC Gate-M to determine whether the dial-up line is
for manual rotary or push-button tone dialing.
 The status of the execution of this SP (dialing in progress, success,
failure) is written to SP5816-152.
 If the check succeeds, the number (dial or push number) written to
SP5816-153 can be used
 If the check succeeds, the number of the carrier line written to
SP816-154 can be used.