Main SP Modes
SM 6-95 D093/D094
System
Maintenance
Reference
5967 Copy Server: Set Function CTL
Disables and enables the document server. This is a security measure that
prevents image data from being left in the temporary file sector of the HDD.
After changing this setting, switch the main switch off and on to enable the new
setting.
[0 to 1/0/1]
0: Enable
1: Disable
5974 Cherry Server CTL
Selects which version of the Scan Router application program, “Light” or
“Full (Professional)”, is installed.
[0 to 1 / 0 / 1 /step]
0: Light version (supplied with this machine)
1: Full version (optional)
5985 Device Setting CTL
The NIC and USB support features are built into the CTL controller. Use this
SP to enable and disable these features. In order to use the NIC and USB
functions built into the controller board, these SP's must be set to "1".
[0 to 2/0/1]
0: Disable 1: Enable 2: Enable for @Remote
1 On Board NIC
2 On Board USB
5990 SP Print Mode (SMC Printout) CTL
1 All (Data List)
Prints all of the system parameter lists for the
item selected.
Input the number for the item that you want to
print, and then press [1]: “Execute” on the
2 SP (Mode Data List)
3 User Program
To Next Page
Loading...
