Installation of MFP Options
D093/D094 3-74 SM
It is very easy to accidentally turn on the write-protect switch when inserting and removing
an SD card.
To remove an SD card from its slot, push it in gently to release it then pull it out of its slot.
Move/Undo Restrictions
Copyright restrictions prevent some applications from being moved.
Application
SD Card Slot
Assignment
Can Move?
Printer Option Type W3601 (D506) 1
--- No ---
Scanner Option Type W3601 (D507) 1
Yes
D506, or
Security & Encrypt. Unit
Printer Option TIFF/GL Filter 2
--- No ---
The Data Overwrite Security and HDD Encryption applications are on one the Security
& Encryption SD card that is inserted into SD card Slot 1 before the machine is
shipped.
These applications must be moved to the Printer Option SD card (D506) so these three
options can be installed together.
Application Move
“Move Exec” (SP5873-1) moves one application program from the original SD card to another
SD card. The application program is moved from Slot 2 to Slot 1.
1. Turn off the main power switch.
2. Remove the SD card slot cover (
x1). ( p.3-73 "Removing the SD Card Slot Cover")
3. Insert the original SD card with the application in Slot 2.
4. Insert the SD card to receive the application in Slot 1.
To Next Page
Loading...
