Ricoh D093 - Dip_Sw 3

Board LEDS, DIP Switches
D093/D094 7-80 SM
DIP_SW 3
SW No. Application Factory
Setting
Comments
1 - OFF Do Not Use
2 - OFF Do Not Use
3 Initializes CMOS
RAM in ICH6-M
OFF OFF: Normal
ON: Clear
4 - OFF Do Not Use
5 Selects boot device
2
ON: Selects sub system boot device
Flash ROM Boot
No.5: ON
No.6: ON
SD Card Boot
No.5: OFF
No.6: OFF:
6 Selects boot device
2
ON:
7 Selects HDD
common power
supply.
OFF OFF: VE System Power (Power always
on, regardless of energy save status.)
ON: VEP System Power (Power source
goes off according to energy save mode
(STR). However, ASIC: Whistle controls
HDD common power source, regardless
of this setting.)
8 - OFF
Do Not Use