Main Machine Installation (D093/D094)
SM 3-21 D093/D094
Installation
Toner Cartridge Storage
Show the operators how to store unused toner cartridges properly.
Cartridges must be stored horizontally on a flat surface to prevent toner from clumping
together at one end of the cartridge.
A toner cartridge should never be stored standing on one end.
Toner cartridges should never be stored in a location exposed to direct sunlight.
Never break the seal of a toner cartridge until it is to be installed.
The room temperature where toner cartridges are stored should be less than 40°C (104°F).
To prevent fire hazards and personal injury, never incinerate used toner cartridges. Obey
the local laws and regulations that apply to such materials.
To install a toner cartridge
1. Set the toner cartridge [1] in the main machine.
2. Pull up the tape [2] then pull it across the toner cartridge from right to left to remove the
tape.
3. On the right end of the toner cartridge, push the knob [3] up until it stops.
4. Close the toner hopper cover [4].
5. Switch the main power switch on.