Ricoh D093 - Installation Preparation

Preparation
SM 3-1 D093/D094
Installation
3. INSTALLATION
3.1 PREPARATION
3.1.1 ENVIRONMENT
1. Temperature Range: 10 °C to 30 °C (50 °F to 86 °F)
2. Humidity Range: 15% to 90% RH
3. Ambient Illumination: Less than 1,500 Lux.
 Never expose the machine to direct sunlight.
 If the scanning unit on top of the machine is exposed to direct sunlight, this could
cause vertical black and white lines in scanned images.
 If the machine is near a window, turn it around so the back of the machine is not
facing the window and install blinds to block sunlight.
4. Ventilation: More than 30 m
3
/hr/person in the work area
5. Ambient Dust: Less than 0.075 mg/m
3
6. If the installation area has air-conditioners or heaters, put the machine in a location where:
 There are no sudden temperature changes from low to high, or high to low.
 The machine will not be directly exposed to cool air from an air conditioner in the
summer.