Ricoh D093 - FUSING

Fusing
D093/D094 5-64 SM
5.7 FUSING
5.7.1 PRESSURE SPRING ADJUSTMENT
1. Open the exit cover and exit unit together.
2. To adjust the pressure, disconnect the spring [A] and connect it to a different hole.
 Center: Standard tension, standard pressure.
 Left: Less tension, less pressure. Set to this position to decrease wrinkling
 Right: More tension, more pressure. Can give better fusing with thick paper.
 Wrinkling occurs more frequently with some types of paper or film. Adjust the
tension of the spring only when necessary.