Ricoh D093 - SIB Hard Error Flag; CIS Output Mode Set

SP4-xxx Scanner
D093/D094 2-92 SM Appendix
0 Black level adjustment did not reach target values within 10 attempts.
4746 SIB Hard Error Flag
PLL lock of Volans DCM input on the SIF (abnormality)
0: Normal
1: Abnormal
Bit (7) 0000 0000 (0)
7 0
6 0
5 0
4 DCM lock status display for CIS5
3 DCM lock status display for CIS4
2 DCM lock status display for CIS3
1 DCM lock status display for CIS2
0 DCM lock status display for CIS1
4750 CIS Output Mode Set
This SP sets the CIS output mode.
[0 to 6 / 0 / 1]
0: Normal output
1: Black shading data output
2: White shading data output
3: Black raw data output
4: White raw data output
5: Raw data output
6: Test pattern output