SP4-xxx Scanner
SM Appendix 2-79 D093/D094
Appendix:
SP Mode
Tables
8 Contrast:1-255
Sets the overall contrast of images scanned in color in the Text/Photo mode.
[1 to 255 / 128 / 1]
1 (Weakest), 128 (Medium: Default), 255 (Strongest)
Note: Raising the contrast level may increase moiré
9 Ind. Dot Erase (x1) 1-7 (Weak-Strong)
Sets the level of independent dot erasure to improve the appearance in the
backgrounds of images scanned in color in the Text/Photo mode.
[0 to 7 / 0 / 1]
0: Default (Off) 1 (Weakest) to 7 (Strongest)
4571
Scanner: Color: Glossy Photo DFU
These SP codes enhance the quality of originals scanned in color in the Glossy
Photo mode (selected on the operation panel).
5 MTF : 0(Off) 1-15 (Weak-Strong)
Sets the MTF coefficient scanned in color in the Glossy Photo mode. When the
original image is converted to electrical signals, the contrast is reduced due to the
influence that adjacent white and black pixels have on one another as a result of
CIS properties. This may cause very narrow bands or spacing between black and
white areas. Use the MTF adjust to correct this problem and emphasize image
detail.
[0 to 15 / 8 / 1]
0 (Weakest), 8 (Medium: Default), 15 (Strongest)
6 Smoothing: 0 (x1) 1-7 (Weak-Strong)
Sets the level of smoothing for originals scanned in color in the Glossy Photo
mode.
[0 to 7 / 0 /1 ]
0 (Weakest), 4 (Medium: Default), 7 (Strongest)
To Next Page
Loading...
