Ricoh D093 - Leveling the Main Machine and Attaching Leg Covers

Main Machine Installation (D093/D094)
D093/D094 3-16 SM
Leveling the Main Machine and Attaching Leg Covers
1. Raise the original feed unit [1].
2. Remove the protective sheet and tape [2].
3. Remove the original table [3] ( x1, x1).
 Be sure to re-attach the pivot screw
and tapping screw at the correct
positions.
4. Open the toner hopper cover [1].
5. Set a level [2] on the plate [3] of the development unit as shown.