Ricoh D093 - Paper Cassette Installation Procedure

Paper Cassette (B853)
D093/D094 3-52 SM
3.5.2 PAPER CASSETTE INSTALLATION PROCEDURE
 Confirm that the machine is switched off and that the power cord is disconnected from
the power source before doing this procedure.
1. Open the drawer of the roll feeder.
2. Remove the front cover [1] of the roll feeder (
x 3).
 If you cannot see the screw on the left or right side of the front cover, push the
cutter [2] away from the top of the screw.
3. Remove the knockout [3] (
x 2).
4. If Roll 2 is installed, remove it.
5. Remove the paper cassette from the paper cassette unit.
6. Remove the rear plate of the roll feeder (
x 2).
7. Put the cassette unit [1] in the roll feeder. The bosses must go through the holes in the