Ricoh D093 - Used Toner Bottle Motor

Motors
SM 5-81 D093/D094
Replacement
and
Adjustment
5.8.4 USED TONER BOTTLE MOTOR
Preparation
 You will need a stubby driver for this procedure.
 PSU (
p.5-87 "Circuit Breaker/PSU")
 Toner collection bottle (
p.5-46 "Used Toner Collection Bottle, Toner Overflow Sensor")
 T&S power pack (
p.5-95 "T&S Power Pack")
 Removal of the fusing unit is recommended.
1. Loosen screw [A] (
x1).
2. Remove screw [B] (
x1)
3. Disconnect motor and slide it out of the machine [C] (
x 1).
4. Motor [D] (
x1, x 2)