Ricoh D093 - LUBRICATION POINTS

Lubrication Points
D093/D094 4-10 SM
4.3 LUBRICATION POINTS
4.3.1 DEVELOPMENT GEARS
1. Remove the development unit. (
p.5-40 "Development Unit")
2. Lubricate the development unit gears with Silicone Grease G501). Apply at the points
shown by the numbers in the drawing.
4.3.2 FUSING GEARS
1. Remove the fusing unit (
p.5-69)
[1]: Fusing Gears (Barrierta S552R). Apply to the surface of the rim.