Ricoh D093 - Installation

Installation of MFP Options
SM 3-83 D093/D094
Installation
Installation
 Before doing the procedure, turn off the main power switch and unplug the machine
from its power source.
1. Remove the cover [1] of Slot A (
x 2).
2. Insert the LAN board [2] into Slot A (
x 2).
3. Use a clean cloth moistened with alcohol to clean where clamp [1] will be attached.
4. Attach clamp [1] (
x1).
5. Set the cables [2] in the notch clamps as shown.
6. Make sure the cables are arranged as shown and not twisted.