Main SP Modes
D093/D094 6-82 SM
5846 UCS Setting CTL
UCS (User Control Service) is the software that manages user codes and the
address books for scan-to-email and scan-to-folder.
1
Machine ID (for Delivery Server)
Displays the unique device ID in use by the delivery server directory. The value
is only displayed and cannot be changed.
This ID is created from the NIC MAC or IEEE 1394 EUI.
The ID is displayed as either 6-byle or 8-byte binary.
6-byte
%02X.%02X.%02X.%02X.%02X.%02X
8-byte
%02X.%02X.%02X.%02X.%02X.%02X.%02X.%02X
2
Machine ID Clear (Delivery Server)
Clears the unique ID of the device used as the name in the file transfer directory.
Execute this SP if the connection of the device to the delivery server is unstable.
After clearing the ID, the ID will be established again automatically by cycling the
machine off and on.
3
Maximum Entries
Changes the maximum number of entries that UCS can handle.
[2000 to 20000/2000/1]
If a value smaller than the present value is set, the UCS managed data is
cleared, and the data (excluding user code information) is displayed.
6
Delivery Server Retry Timer
Sets the interval for retry attempts when the delivery server fails to acquire the
delivery server address book.
[0 to 255/0/1 sec.]
0: No retries
To Next Page
Loading...
