Ricoh D093 - Black Level Data DFU; CIS Gain Adjustment DFU

SP4-xxx Scanner
SM Appendix 2-87 D093/D094
Appendix:
SP Mode
Tables
4724
Black Level Data DFU
Displays the minimum value for black level correction for each CIS unit after
black level is adjusted after power on.
[0 to 1023 / 0 / 1]
1 CIS 1
2 CIS 2
3 CIS 3
4 CIS 4
5 CIS 5
4732
CIS Gain Adjustment DFU
Displays the gain value of analog ASIC (LM98714) of each CIS unit after white
level is adjusted when the machine is powered on.
 The peak value for standard white plate reading (the shading data peak
value) is set to 880 ±20 digits by white level adjustment.
 The setting can be written with this SP and the set value is reflected in the
analog ASIC (LM98174) of the CIS when an original is scanned.
[0 to 255 / 84 / 1]
1 CIS 1
2 CIS 2
3 CIS 3
4 CIS 4
5 CIS 5