Ricoh D093 - Fusing Unit

Fusing
SM 5-69 D093/D094
Replacement
and
Adjustment
5.7.7 FUSING UNIT
 Switch the main power switch off. Then disconnect the machine from its power source.
Let the fusing unit become cool for 10 minutes or more before you remove it.
Preparation
 Rear cover, controller cover (
p.5-3 "Rear Cover, Controller Cover")
 Remove the left and right side covers. (
p.5-2 "Side Covers")
 Remove paper exit unit (
p.5-4 "Paper Exit Unit")
1. Remove:
[A] Anti-condensation heater switch bracket (
x2)
[B] Left vertical ground plate (
x2)
[C] Right vertical ground plate (
x2, x1)