Ricoh D093 - Page 252

Fusing
D093/D094 5-70 SM
2. Disconnect:
[A] Fusing lamps (
x2)
[B] Pressure roller thermistor
( x1, x1)
Exit unit set switch
( x1)
[C] Fusing exit sensor (
x1)
[D] Pressure roller thermistor (
x1)
3. Open clamps [E] (
x2).
4. Release the arms of the fusing unit [A] on both sides.
 The fusing unit is very heavy. Pull it out slowly.
5. Remove the fusing unit [B] (
x1, x2)