Ricoh D093 - SERVICE CALL TABLES

Service Call Tables
SM 7-15 D093/D094
Trouble-
Shooting
7.3 SERVICE CALL TABLES
7.3.1 SC100
101 D Scanner Lamp Error
At power on the scan lamp trigger remained off.
 CIS-to-SIPU harness loose, disconnected, or defective
 CIS-to-SIF-to-SIPU harness loose, disconnected, or defective
 CIS, SIPU defective
143 C Scanner Automatic Adjustment Error
Automatic adjustment of the CIS failed at power on.
 Standard white strips dirty or not platen white plate installed improperly
 CIS LED defective and not lighting
 CIS-to-PSU harness connector loose, disconnected, or defective
 CIS-to-SIPU harness connector loose, disconnected, or defective
 CIS defective
 MCU defective
 SIF defective
 SIPU defective
144 D SIF Communication Error
SIF serial transmission did not begin within 1 sec. after power on. No
communication with SIF.
 MCU defective
 SIF defective
 SIF-to-MCU harness connector loose, disconnected, or defective
 SIPU defective