Ricoh D093 - CERT: Subject; Firm up Status; Firm up User Check; Firmware Size

Main SP Modes
D093/D094 6-66 SM
83
Firm Up Status
Displays the status of the firmware update.
85
Firm Up User Check
This SP setting determines if the operator can check the previous version of
the firmware before the firmware update execution. If the option to check the
previous version is selected, a notification is sent to the system manager and
the firmware update is done with the firmware files from the URL.
86
Firmware Size
Allows the service technician to check the size of the firmware data files
during the firmware update execution.
87
CERT: Macro Version
Displays the macro version of the @Remote certification
88
CERT: PAC Version
Displays the PAC version of the @Remote certification.
89
CERT: ID2 Code
Displays ID2 for the @Remote certification. Spaces are displayed as
underscores (_). Asterisks (****) indicate that no @Remote certification
exists.
90
CERT: Subject
Displays the common name of the @Remote certification subject. CN = the
following 17 bytes. Spaces are displayed as underscores (_). Asterisks (****)
indicate that no DESS exists.
91
CERT: Serial Number
Displays serial number for the @Remote certification. Asterisks (****) indicate
that no DESS exists.