Ricoh D093 - COMMON PROCEDURES

Common Procedures
SM 5-1 D093/D094
Replacement
and
Adjustment
5. REPLACEMENT AND ADJUSTMENT
5.1 COMMON PROCEDURES
 Before doing any procedure, turn off the main power switch and unplug the machine
from its power source.
5.1.1 BEFORE WORKING ON THE MAIN MACHINE
Always remove these items before you start work on the machine:
1. Remove:
 [A]: Upper output stackers (x 2)
 [B]: Guide lever
 [C]: Original output guides (x 4)
 [D]: Upper output guide (x 1)
 Lower output trays (x 3) (not shown)