Main SP Modes
D093/D094 6-48 SM
5120 Mode Clear Count Removal CTL
For a machine that has a counting device, this SP sets the next action when a
copy job stops because the card is removed, the card is expired, or if the paper
supply runs out. Japan Only
[0 to 2/0/1 step]
0: Yes
1: Stand-by
2: No
5121 Counter Up Timing CTL
Determines whether the optional key counter counts up at paper feed-in or at
paper exit.
[0 to 1/1/1]
0: Feed count
1: No feed count
5127 APS Off Mode CTL
This SP can be used to switch APS (Auto Paper Select) off while a coin lock or
pre-paid key card device is connected to the machine.
[0 to 1/0/1]
0: On
1: Off
5162 App. Switch Method CTL
Determines if the application screen changes with a hardware switch or a
software switch.
[0 to 1/0/1]
0: Soft Key Set
1: Hard Key Set
To Next Page
Loading...
