Cleaning Points
SM 4-7 D093/D094
Preventive
Maintenance
4.2.2 CORONA WIRE CLEANING
Transfer/Separation Corona Unit
1. Remove the transfer/separation corona unit. ( p.5-38 "Transfer Corona, Separation
Corona Wires")
2. Remove the paper guides [1].
3. Use lens paper to clean the transfer/separation wires [2].
4. Use a dry or water damp cloth to clean the paper guide and frame [3].
If you use a damp cloth, use the damp cloth first. Then be sure to wipe the cleaned
area dry with a clean dry cloth.
To Next Page
Loading...
