SP8-xxx Data Log 2
D093/D094 2-214 SM Appendix
When 1 sheet is fed for duplex scanning the Front count is 1 and the Back count is 1.
If a jam occurs during the job, recovery processing is not counted to avoid double counting.
Also, the pages are not counted if the jam occurs before the first sheet is output.
8231
Scan PGS/Mode [0 to 9999999/ 0 / 1]
These SP's count the number of pages scanned by each ADF mode to
determine the work load on the ADF.
1 Large Volume
Selectable. Large copy jobs that cannot be loaded in
the ADF a to ne time.
2 SADF
Selectable. Feeding pages one by one through the
ADF.
3 Mixed Size
Selectable. Select “Mixed Sizes” on the operation
panel.
4 Custom Size Selectable. Originals of non-standard size.
5 Platen
Book mode. Raising the ADF and placing the original
directly on the platen.
6 Mixed 1side/2side Job mixed with printing one/two sides.
If the scan mode is changed during the job, for example, if the user switches from ADF to
Platen mode, the count is done for the last selected mode.
If the user selects “Mixed Sizes” for copying in the platen mode, the Mixed Size count is
enabled.
In the SADF mode if the user copies 1 page in platen mode and then copies 2 pages with
SADF, the Platen count is 1 and the SADF count is 3.
8241
T:Scan PGS/Org [0 to 9999999/ 0 / 1]
These SP's count the total number of scanned pages by original type for all
jobs, regardless of which application was used.
8242
C:Scan PGS/Org [0 to 9999999/ 0 / 1]
These SP's count the number of pages scanned by original type for Copy
jobs.
To Next Page
Loading...
