Ricoh D093 - Motor Speed Adjustment DFU

SP1-xxx Feed
D093/D094 2-4 SM Appendix
1106 Fusing Temperature Display
This SP displays the hot roller and pressure roller temperatures.
1 Hot Roller Temperature
2 Pressure Roller Temperature: Center
3 Pressure Roller Temperature: Edge
1159 Fusing Jam SC Setting
The setting of this SP determines whether the machine issues SC559 after three
successive jams occur in the fusing unit.
[0-1/0/1]
0: Disabled. SC559 not issued after 3 successive jams in the fusing unit.
1: Enabled. SC559 issued after 3 successive jams in the fusing unit. The
operator cannot restore operation of the machine by cycling the machine off/on.
SC559 is a Class "A" SC error. The service technician must restore operation of
the machine.
1801
Motor Speed Adjustment DFU
These SP's adjust the speeds of the feed motor (paper cassette), main motor,
and fusing motor. The motor speeds can be adjusted to correct images that
appear scratchy or of uneven density. This can occur when:
 Copying originals with large quantities of black.
 Copying originals with a large quantity of black near the trailing edge.
 Printing multiple copies of positive/negative (reverse) images.
1
Feed Motor: 1st Roll DFU
[-30 to +30/0/1]
For every change of "1", speed is adjusted approximately 0.06%.
2
Feed Motor: 2nd Roll DFU
[-30 to +30/0/1]
For every change of "1", speed is adjusted approximately 0.06%.