Main SP Modes
SM 6-47 D093/D094
System
Maintenance
Reference
2
External Optional Counter Type
Enables the SDK application. This lets you select a number for the external
device for user access control.
[0 to 3/0/1]
Note: “SDK” refers to software on an SD card.
[0 to 3/1]
0: None
1: Expansion Device 1
2: Expansion Device 2
3: Expansion Device 3
5114 Optional Counter I/F CTL
This SP code enables the interface for an optional counting device.
[0 to 8/0/1]
Important Note: Only settings that can be enabled for machines outside Japan
are listed here.
0: Disabled
1: Key Cards (RK2, 3, 4)
2: Decrementing keycard
11: Incrementing key cards for use outside Japan
12: Decrementing key cards for use outside Japan
5118
Disable Copying CTL
Temporarily denies access to the machine.
[0 to 1/0/1]
0: Release for normal operation
1: Prohibit access to machine
To Next Page
Loading...
